When installing back cover of wire controller, fit the lower back cover into the
body, hold on and click the upper part into the body, then push them together.
When dismantling the back cover, follow the steps below:
Installation of Wire Controller
slot (rectangular shape,
sleeping between back
cover and body, turn
wire controller into a certain
angle then you can see it)
slot
top
click
click
LCD Screen
Front Panel
Put a flat screw driver into a slot,
unclench one side of the cover,
then another slot, and unclench
another side of the cover, then you
can open the cover.
Note: Do not push the front panel of wire controller with force to avoid crushing
the LCD screen or internal PCB board.
OPERATION OF AIR CONDITIONER
10
