7
SPA YARD
PANEL
SWITCHED ON
The water temperature will be lower than the programmed temperature.
Correct setting of recirculation pump and pressure switch.
The water
temperature will
be higher than
the programmed
temperature.
The display shows the current water
temperature inside the Spa.
"FLO" appears on the display
Flashing Icon
2.1. CONTROL SYSTEM
2.1.1. INITIAL START-UP
Before connecting the Spa to the electrical current, you must check that:
The water level in the Spa is sufficient (the level should half cover the Skimmer inlet).
There are no elements that could obstruct the water flow in the suction nozzles and skimmer.
N.B.
Generally, the first time you switch on the Spa, the water temperature inside the Spa is lower than the
programmed value (factory setting of 35° C). Therefore, as soon you have switched on the digital panel
and the self-check has been successfully completed, the water recirculation pump and the heater will be
activated.
The following diagram summarises the different situations that might occur the first time the Spa is
switched on:
•
•
•
Heater switched on
Recirculation pump switched on
Displayed icon is solid
2. DIGITAL PANEL OPERATION
The water temperature will be lower than
the programmed temperature.
Setting of the recirculation pump or
pressure switch incorrect.
The temperature (40° C) and time are displayed.
The recirculation pump will operate
for 30 seconds.
The time and the water temperature
inside the Spa will be displayed.
