16
SPA YARD
2.3.4. KEYPAD LOCK
This function has two modes:
•
Lock P
(partial lock): this allows the activation of the water hydromassages, the air hydromassage and
the spotlight.
Lock F
(full lock): all keys are disabled.
When one the two modes is activated th
e
icon is solid.
2.3.4.1. Partial keypad lock (LocP)
The partial keypad lock is activated by means of the following steps:
Hold
the
key down for 5 seconds. After holding the
key down for 2 seconds, the
icon will
start to flash. 3 seconds later it will stop flashing and remain solid. "LocP" will appear in the display,
meaning that the
partial
lock has been activated.
N.B.:
•If one the disabled keys is pressed during partial lock, "LocP" will appear in the display for 5 seconds.
In the event of a power failure, the keypad lock will be deactivated.
2.3.4.2. Full keypad lock (LocF)
Full keypad lock is activated by means of the following steps:
Hold
the
key down for 10 seconds. After holding the
key down for 2 seconds, the
icon will
start to flash. 3 seconds later it will stop flashing and remain solid. "LocP" will appear in the display and 5
seconds later "LocF" will appear in the display, meaning that the
full
lock has been activated.
N.B.:
•If one the disabled keys is pressed during full lock, "LocF" will appear in the display for 5 seconds.
In the event of a power failure, the keypad lock will be deactivated.
If the keypad is partially locked, it will not be possible to activate the full lock without first
unlocking it.
2.3.4.3. Keypad unlock (Uloc)
To deactivate the keypad lock (partial or full):
Hold
down the
key for 5 seconds. After holding down the
key for 2 seconds, the
icon will
start to flash (the corresponding "LocP" or "LocF" message will appear on the display) and, 3 seconds
later, the
icon will disappear and the (partial or full) lock deactivated. The "Uloc" message will
appear in the display for 5 seconds.
2.3.5. SETTING THE WATER TEMPERATURE ABOVE 40° C
This function allows you to raise the value of the water temperature in the Spa in a controlled manner
above the programmed maximum of 40º C to a maximum of 42º C.
Adjustment characteristics:
•Adjustment range: minimum 0.5° C, maximum 2.0° C.
Programming increment: 0.5°C
Standard value: 0.5°.
Value when switched on: the last programmed value is restored.
•
•
•
•
•
•
•
•
•
•
