5.2. How to update Date and Time of the Physilog 6S
Via computer:
⋅
Create a new text file on the Desktop of your computer or directly on the Physilog® sensor
(on Windows: right click, new>text file, on Mac: open text editor and save file as text file)
⋅
Leave it empty and rename it to TIME (complete name with file extension: TIME.txt)
⋅
Copy-paste the file to the Physilog® if you saved it on the Desktop
⋅
Disconnect the Physilog® from the computer to update the time and date to the hour when
the file has been created
Create a new text file each time you update the date, do not just rename or modify an existing
TIME.txt file (TIME.txt file previously created will update to the date it was created, so in the
past).
The TIME.txt file will disappear from Physilog's memory when disconnecting the Physilog® from
the computer, therefore it is normal to not find it the next time you open the Physilog® on the
computer.
Via mobile application:
Connect the Physilog® to the Android companion application inside the “Remote control” mode.
Start a short measurement from the app, you can stop the measurement as soon as the stop
button is available in the user interface of the mobile application. Then disconnect the sensors
or completely quit the app.
5.3. How to update firmware of Physilog 6S with nRF Connect
The firmware is updated via Bluetooth. Therefore, install the nRF application on a mobile or
tablet (Android or iOS) and follow the steps below. It may be necessary to install a file manager
application in addition to the nRF app to be able to select the firmware file from a chosen
location of file storage on your device.
Android
⋅
Install the “nRF Connect for Mobile” app on the Android device
⋅
Download the latest firmware version from the email to the Android
device
⋅
Open the nRF Connect app and enable all necessary permissions
(Bluetooth and Position, see pictures below)
⋅
Go to Scanner tab and scan for surrounding Physilog (gently shake the
Physilog 6S to enter detection mode)
⋅
Select connect of one Physilog 6S sensor in the list
⋅
Plug the selected Physilog to a power source to be sure to have enough battery to perform
the update
Physilog 6S user manual v1.0.0 Date: 08.01.2021
Copyright © 2021, All Rights Reserved - Gait Up SA. CH-1015 Switzerland
7
www.gaitup.com
