Gait Up GO Mobile Application is a software used to:
●
wirelessly communicate with the Physilog6 sensor accessory via BLE
●
provide instructions about the different tests intended for the Participant to perform
●
receive, process and analyse the raw data sensed by the Physilog6 sensor device
●
generate clinical reports showing the main outcome indicators for the Medical
Professionals to interpret it.
●
update the Firmware of the Physilog6 sensor device accessory
The Gait Up GO Mobile application runs on off the shelf Android and iOS mobile phones and
tablets.
The Gait Up GO Mobile application provides guidance to the users on how and where to place
the Physilog6 sensor device on the Participant’s body (see section 4 for further details)
Physilog6 sensor device
Fig 3. Physilog 6 sensor
Physilog 6 sensor device is an accessory of the Gait Up GO medical device intended to
measure human movement parameters.
The Physilog6 sensor device is operated via the Gait Up GO mobile application to perform the
following actions:
●
Connect the sensor device to the phone/tablet via BLE
●
Send raw data of human movement to the Gait Up GO mobile application
●
Disconnect the sensor device from the phone/tablet via BLE
The Physilog6 sensor device has a function called “shake up to wake up”. After 30 seconds of
no activity (i.e. sensor device not moving and not connected to the Mobile Application), the
ENGLISH
15/51
