IPE2500A and IPE2500A-MLS Paging Encoder/Desktop Controller
Installation
45
03/12
Level Adjustments and Diagnostics
Main Diagnostics Selection
To enter the main programming mode:
1.
Remove power from the desk set.
2.
Reapply power and wait for the
PB1
through
PB4
LED
S
to illuminate. (The display will indicate
“checking parameters - please wait.”) Press
PB1,
PB2,
PB3,
or
PB4
to enter diagnostics.
3.
The display will then indicate that the Main Diagnostics mode has been entered, and buttons PB1-
PB4 can now be pressed. PB1 through PB4 are used to select different parameter changes from the
default settings.
Programming Menu
The programming buttons,
PB1
through
PB4
, are used to navigate the menu for specific installations and
to perform diagnostics. They are:
Line Output Level
Line In Sensitivity
Diagnostics
Tone Level Adjustments
Summary of Contents for IPE2500A
