GAI-Tronics Auteldac 4, Installation And User Manual

Page: 8 / 28

Auteldac 4 7
Headset
For models fitted with headset socket, use only GAI-Tronics ATEX
headset part number 100-02-0598-001. See section 3.6 for operation.
NOTE:
GAI-Tronics only currently supply an ATEX certified headset. No IEC
certified is available. IEC certification will be invalidated if an ATEX
headset is connected.
Headset certification details:
II 2 G
EEx ib IIC T4 (-20
°
C
≤
T
a
≤
40
°
C)
TUV03ATEX2124
NOTE: the headset temperature class is T4 only. With the headset
fitted, the temperature class of the complete instrument is that of the
headset.
The headset must only be used in accordance with the supplied
manufacturer’s manual.
1.4.9 Optional Headset Extension lead
The standard headset cord is approximately 820mm long and can
extend to approximately 2m (dependant on safe operating conditions.)
A separate headset extension lead is available as an optional extra
(part No. 610-35-2036-001). This will allow the operator to use the
headset over 6 metres away from the telephone unit. Note: Refer to
section 2.2.1 for hazard warnings regarding long corded Headsets &
handsets.
1.5 Suitability for Use
Auteldac 4 telephones are suitable for connection to the following types
of telephone line:
•
Direct analogue PSTN
•
PABX
•
Manual Exchange
•
Private System
Connection may NOT be made to:
•
Shared service (party) lines.
•
Pay phone extension
Any usage other than those indicated will invalidate the certification of
the telephone. Any cases of difficulty should be referred in the first
instance to GAI-Tronics on +44 (0)1283 500500.