Auteldac 4
23
3.1 Making and Receiving Calls
•
To make a call, lift the handset, wait for dial tone, dial required digits
(or press required memory button or Last Number Redial where
fitted) and wait for connection.
•
For CB versions (i.e. no buttons are fitted), no dialling is possible –
the call must be connected by the exchange sensing the telephone
off hook.
•
To end a call, replace the handset in its cradle.
•
To receive a call, lift the handset when ringing is heard.
•
Take care, when using either the handset or optional headset, not to
allow cables to tangle or snare around the body or neck.
3.2 Last Number Redial
(15 and 18 button versions only)
Press LR to redial the last dialled number.
3.3 Recall Function
(15 and 18 button versions only)
Press R to send a “recall” signal to the exchange. The type of recall
can be selected (see section 2.8.1).
3.4 Programming
(18 button versions only)
The three memory buttons, M1, M2 and M3 may each be programmed
with up to 17 digits for one touch memory dialling.
To program a number:
•
Lift the handset
•
Press S
•
Enter the required digits
•
Press S again
•
Press the required memory button, M1, M2 or M3
•
Replace the handset
3.5 Secrecy or Mute Function
(15 button versions only)
During a call, press and hold the S button to mute the microphone.
Summary of Contents for Auteldac 4
Page 27: ...Auteldac 4 26 5 CE DECLARATION...
