Pub. 42004-703L2A
Model 707-001-EX-F07045 SmartSeries Hazardous Area Speaker Amplifier Enclosure
Page:
5 of 11
\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-703l2a.doc
11/07
Mounting
N
OTE
:
The mounting surface must be able to support the weight of the aluminum enclosure. See the
Specification section for the weight and dimensions of the unit.
The enclosure comes standard with mounting feet capable of being rotated 90º. This allows for top and
bottom mounting feet or side-to-side mounting feet. The enclosure ships with the mounting feet in the top-
to-bottom configuration, for ease of installation. Refer to Figure 4 for both sets of dimensions.
Figure 4. Model 707-001-EX-F07045 Enclosure Mounting Details
The enclosure must be securely fastened with 1/2-inch diameter steel mounting bolts located on all four
mounting feet. Stainless steel hardware is recommended in outdoor applications.
N
OTE
:
Refer to the Killark Installation, Operation, and Maintenance Data Sheet enclosed with the unit for
additional information.
