57
English
10.1 LANGUAGE
The display shows the following:
where
XXXXXXXX
are the languages which can be selec-
ted: Italian, French, English, Spanish, German, Dutch and
Portuguese.
Press keys T8 to select the various options available if the
parameter displayed needs to be changed;
press key T9 to display the next parameter.
10.2 TEA/MIXED HOT WATER
This function allows the hot water mixing function to be
enabled or disabled..
The display shows the following:
where
XX
can be
YES
or
NO.
Press keys T8 if the parameter needs to be changed.
This function is pre-set to
YES
mode.
Pressing key T9 enables the next setting to be accessed.
10.3 SENSITIVITY
This function enables the sensitivity level to be set. This
setting is based on the content of mineral salts in the mains
water used.
The sensibility level must be positioned to HIGH if the water
used has a low mineral salts content. Whereas, the sensitivity
level must be positioned to LOW if the water used has a
high mineral salts content.
The display shows the following:
where
XXXXX
may be:
Low sensitivity 150K
Ω
Medium sensitivity 400K
Ω
High sensitivity 1M
Ω
Press keys T8 if the parameters need to be changed.
Pressing key T9 enables the next setting to be accessed.
The machine is pre-set to a MEDIUM sensitivity level, which
covers the majority of uses.
Language
XXXXXXXX
mixed water
XX
Sensibilità
XXXXX
10.4 MAINTENANCE CYCLES
This function enables the number of cycles which can be
performed to be set (dispensing permitted).
The display shows the following:
where
xxxxxx
can be a number from 0000 to 99,000
in steps of 100.
The function is disabled when
xxxxxx
is equal to 0000.
Press keys T8 if the parameter needs to be changed.
Pressing key T9 enables the next setting to be accessed.
10.5 TEMPERATURE
This function enables the temperature expressed in °C or °F
to be displayed.
The display shows the following:
where °X may be “°C” or “°F”.
Press keys T8 if the parameter needs to be changed.
Pressing key T9 enables the next setting to be accessed.
10.6 NUMBER OF UNITS
This function enables the number of units comprising the
machine to be set.
The display shows the following:
where
X
is a value selectable from 1÷4.
Press keys T8 if the parameter needs to be changed.
Pressing key T9 enables the next setting to the accessed.
Mainten. cycles
XXXXXX
Temperature
°X
No. of units
X
