English
19
5
Before
connecting
the
water
filter
to
the
machine, perform a wash
cycle until the water is
clear. Then connect the
water
filter
to
the
machine.
5
Connect the drain cup (F) to the drainage pipe (B).
55
Should the mains pressure
be higher than 0,5 MPa, a
pressure reducer balanced
for high pressure should
be installed (device in
which any mains pressure
increase does not effect
the output pressure).
55
In case of filling tube
replacement, use the new
set of tubes supplied with
the appliance, not the old
one.
5
5.2
Electrical connection
5
Before proceeding with
electrical connection,make
sure that the voltage rating
corresponds
with
that
indicated on the CE plate
and on the connection
plate on the power supply
cable. Check to ensure
that the electrical supply
line is able to support the
machine load (see chapter
"Technical features").
5
Connect to an earthing socket which complies with
current legislation.
55
Check that the power
supply cable is efficient and
that
it
complies
with
national
and
European
safety standards.
5
The user must undertake to
power
the
machine
protecting the power line
using
a
suitable
safety
switch
(cut-out)
that
complies with the legislation
in force in the country itself.
5
