English
5
Before
connecting
the
appliance to the water
network, please read and
follow
the
applicable
regulations in force in your
country.
If the power cord is
damaged,
it
must
be
replaced
by
the
manufacturer, its service
centre or by adequately
qualified
personnel
in
order to avoid any risks.
It is recommended to
install a residual current
device (RCD) with a rated
residual
current
not
exceeding 30 mA.
Connect the appliance to a
drinking water main with
pressure
between
0.15
MPA and 0.8 MPA (1.5
and 8 bar); see data on
the data plate.
In case of filling tube
replacement, use the new
set of tubes supplied with
the appliance, not the old
one.
Access to the internal area
is restricted to persons
having
knowledge
and
practical experience of the
appliance, in particular as
far as safety and hygiene
are concerned.
Never clean the internal area of
the machine with power
supply on or with the plug
connected. In any event do not
use water jets or detergents.
