16
en-us
Conversion to another type of gas
4.
Turn the control knob clockwise to position 1
(F)
.
5.
Turn the control knob counterclockwise to position 0
(G)
. Wait until the illuminated ring turns yellow
(H)
.
6.
Set the gas type on the control knob
(I)
, the currently
selected position will turn green:
7.
Keep the control knob at the desired setting for at
least 5 seconds. The illuminated ring around the
control knob will turn green
(I)
.
8.
To save the setting, it is necessary to exit the menu as
follows:
Turn the control knob to position 0
(J)
. Then
turn the control knob counterclockwise to position 12
(K)
.
Turn the control knob clockwise to position 1
(L)
. Turn
the control knob counterclockwise to position 0
(M)
.
Wait until the illuminated ring goes out
(N)
.
The setting is saved. The illuminated ring around the
control knob will turn yellow for a second. Wait until the
illuminated ring goes out.
Checking functions after the conversion:
The flames are adjusted correctly if no yellow tips are
visible. They must not go out when switching over swiftly
from the high to the low setting.
Note:
Stick the adhesive label included with the nozzle
set over the rating plate of the appliance to document the
changeover to a different gas type.
Control knob position
Gas Type
7
NG A 6" WC
9
Propane 10" WC
)
(
)
*
+
3URSDQH:&
1*$:&
V
,
.
-
1
0
/
Summary of Contents for VG491211CA
Page 51: ......
