Gaggenau VG 295 RK, Instruction Manual

Page: 22 / 24

22
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
Fault Possible cause Solution
Burner does not ignite when
switched on, operation indica
-
tors are off.
No electrical power. Turn control knob to 0. Check the fuse box if the
fuse has tripped.
Burner does not ignite when
switched on, operation indica
-
tor of the switched on burner is
flashing.
Malfunction of the burner or the
gas supply.
Turn control knob to 0.
Check:
▯
Are all burner parts correctly assembled?
▯
Is the gas shut-off valve open?
▯
Is the burner dry and clean?
▯
Is there an air pocket in the gas supply line
after first installation or changing the LP
(propane) gas tank?
▯
LP (propane) gas: is the gas tank empty?
Burner goes off during opera
-
tion, operation indicators go
off, only the operation indicator
of the affected burner contin
-
ues to flash for a few seconds.
Malfunction of the burner or the
gas supply.
Turn all control knobs to 0. Wait, until the appli
-
ance has cooled!
Check affected burner:
▯
Are all burner parts correctly assembled?
▯
Is the electrode soiled (food remains) or
wet?
▯
Is the burner soiled by boiled over food?
▯
Check for strong draughts (for example open
window behind the cooktop)?
▯
LP (propane) gas: is the gas tank empty?
Burners go off during opera
-
tion, operation indicators go
off.
Power cut Turn all control knobs to 0. Check the power
supply. There will be no automatic re-ignition
after a power cut.
Burners go off during opera
-
tion, all operation indicators
are flashing.
Overheating protection Turn all control knobs to 0. Wait, until operation
indicators go off.
The kitchen smells of gas. There may be a leak in the gas
cylinder coupling.
Check that the coupling is sound.