9
Operating controls
Switching the appliance on
1.
Switch on the appliance with the On/Off button
ÿ
.
A warning signal sounds, the temperature display
for the freezer section flashes and the alarm
button
Ú
is lit.
2.
The warning signal is switched off by pressing
the alarm button
Ú
.
The appliance begins to cool. Light is switched
on when the door is open.
The factory has recommended the following temperatures:
▯
Refrigerator s39 °F (+4 °C)
▯
Freezer section 0 °F (–18 °C)
Operating tips
▯
After the appliance has been switched on, it may
take several hours until the set temperature has
been reached. Do not put any food in the
appliance beforehand.
▯
The fully automatic No Frost system ensures that
the freezer compartment remains free of ice.
Defrosting is not required.
▯
The front sides of the housing are sometimes
heated slightly. This prevents condensation in the
area of the door seal.
▯
If the freezer compartment door cannot be
immediately re-opened after it has been closed,
wait until the resulting low pressure has
equalized.
1
2
3
4
5
6
7
8
9
°F
°F
1
On/Off button
ÿ
Serves to switch the whole appliance on and
off.
2
Fast button freezer section
h
Switches fast freezing on and off (see chapter
“Fast freezing”).
3
Temperature selection buttons freezer
s/–
These buttons set the temperature in the
freezer section.
4
Temperature display freezer compartment
The numbers correspond to the set freezer
compartment temperatures in °F.
5
Alarm button
Ú
Used to switch off the warning signal (see
chapter “Alarm function”).
6
Holiday button
»
Is used to switch holiday mode on and off (see
chapter Holiday mode).
7
Temperature selection buttons refrigerator
s/–
These buttons set the temperature in the
refrigerator section.
8
Temperature display refrigerator
compartment
The numbers correspond to the set
refrigerator compartment temperatures in °F.
9
Fast button refrigerator section
Û
Switches fast cooling on and off (see chapter
Fast cooling).
