To achieve proper drying, always use a liquid rinse agent, even if your
detergent contains a rinse agent or drying additive.
Rinse Agent Dispenser
Open the rinse agent dispenser by lifting the tab with your thumb.
NOTE: The dishwasher indicates low rinse agent either by showing the
symbol in the countdown display, or illuminating the reill rinse agent
light (model dependent).
Add liquid rinse agent to the dispenser as shown until the rinse agent
reservoir is full. Wipe up any excess rinse agent that puddles when the
dispenser reservoir is full.
Setting amount of rinse-aid
The amount of rinse-aid dispensed can be set from “
r:00
” to “
r:06
” .
Open the door.
•
Turn unit on by pressing the
•
ON/OFF
button.
Hold down button “A” (see page 4) and press START until the display
•
indicates “H:00”
Press “
•
A
” button until the display indicates “
r:05
”
.
Release both buttons.
•
Press
•
“C”
to select the desired setting.
“r:00” means the Rinse Agent dispenser is off.
•
“r:01” means the Rinse Agent dispenser is at the lowest setting.
•
“r:02” means the Rinse Agent dispenser is low setting.
•
“r:03” means the Rinse Agent dispenser is medium setting.
•
“r:04” means the Rinse Agent dispenser is medium high setting.
•
“r:05” means the Rinse Agent dispenser is high setting.
•
“r:06” means the Rinse Agent dispenser is at the highest setting
•
Save the selected language by pressing the
•
START
button.
Close the door.
•
Switching off rinse-aid reill indicator
Set the rinse aid option to
•
r:00
NOTE: Do not change the amount of rinse-aid unless there are streaks
(select lower setting) or water stains (select higher setting) visible on the
utensils.
Rinse Agent
8
