Fault, what to do?
en
41
Waste water pump
Large food remnants or foreign objects which were not
captured by the filters may block the waste water pump.
The rinsing water will then be above the filter.
Warning – Danger of cutting!
Sharp and pointed objects or glass fragments may block
the waste water pump.
Always carefully remove foreign objects.
Clean the waste water pump as follows:
1.
Disconnect the dishwasher from the power supply.
2.
Take out top basket
12
and bottom basket
9*
.
3.
Remove the filters
1j
.
4.
Scoop out water, use a sponge if required.
5.
Prise off the pump cover (as shown) using a spoon.
Grip the pump cover by the crosspiece and lift
diagonally inwards (1). Remove cover completely.
6.
Check impeller wheel and remove any foreign
objects.
7.
Place pump cover in the original position (2) and
press down until it engages (3).
8.
Install filters.
9.
Re-insert baskets.
&/,&.
