en
Fault, what to do?
42
Fault table
Fault
Reason
Remedial action
Fault code
§
:
³µ
is lit.
Supply hose kinked.
Install supply hose without kinks.
Water supply turned off.
Turn on water supply.
Water supply jammed or calcified.
Turn on water supply.
Flow rate must be at least 10 l/min. when
water supply is open.
Filter in the water supply blocked.
Switch off the appliance and pull out the
mains plug. Turn off water supply. Unscrew
water connection.
Clean filter in the supply hose. Screw water
connection on again. Check for leaks.
Reconnect power supply. Switch on the
appliance.
Fault code
§
:
¯Å
is lit.
Intake opening (on right inside of
appliance) covered by utensils.
Arrange utensils so that the intake opening
is not obstructed.
Fault code
§
:
³
is lit.
Heating element calcified or soiled.
Clean appliance with dishwasher cleaning
agent or descaler.
Operate the dishwasher with water
softening system and check the setting.
Fault code
§
:
³
is lit.
Water protection system activated.
Turn off water supply.
Call customer service and quote the fault
code.
Fault code
§
:
³
is lit.
Fault code
§
:
³±
is lit.
Constant water supply.
Fault code
§
:
is lit. *
Filters
1j
are soiled or blocked.
Clean filters.
Fault code
§
:
is lit.
Waste-water hose kinked or blocked. Install hose without kinks, remove any
residue.
Siphon connection still sealed.
Check connection to siphon and open if
required.
Cover on the waste water pump
loose.
Lock cover correctly.
Fault code
§
:
is lit.
Waste water pump blocked or cover
on the waste water pump is not
locked in position.
Clean pump and lock cover correctly.
Fault code
§
:
Å
is lit.
Mains voltage too low.
No appliance fault, have the mains voltage
and electrical installation checked.
A different fault code is
indicated on the digital display.
(
§
:
¯³
to
§
:
´¯
)
A technical fault has probably
occurred.
Switch off the appliance with the ON/OFF
switch
(
. After a short time restart the
appliance.
If the problem recurs, turn off water supply
and pull out the mains plug.
Call customer service and quote the fault
code.
Home network is not loading.
WLAN is not active on the router.
Check the wireless network connection of
your router.
WLAN display flashes.
Connection to the home network is
not available.
Activate the wireless network on your router.
* depending on the configuration of your specific dishwasher
