Gaggenau CX 482, Instruction Manual

Page: 13 / 56

13
Operating the appliance
en
1
Operating the appliance
Operating the appliance
This chapter explains how to set a cooking position. The
table shows heat settings and cooking times for various
meals.
First-time use
When you switch on the appliance for the first time, the
menu for selecting the initial settings appears on the
display. Select the settings you require.
Once you have confirmed these settings, the main
screen will appear.
Note: You can change the settings at any time.For
information on how to select these settings, see the
section entitled
~
"Basic settings"
.
Switching the hob on and off
The main switch is used to switch the hob on and off.
To switch the hob on: Touch the
#
symbol. The
indicator above the main switch lights up. After a short
switch-on time, the hob will be ready for operation.
To switch the hob off: Touch the
#
symbol. The display
switches off. All the cooking positions are switched off.
The residual heat indicator will remain lit until the
cooking positions have cooled down sufficiently.
Notes
– The hob will automatically switch off if the cooking
positions have been switched off for more than
30 seconds.
– The settings are stored for 10 seconds after the
hob has been switched off. If you switch the hob
back on during this time, the option to confirm the
previous settings will appear on the main screen.
For information on this setting, see the section
entitled
~
"Basic settings"
.
Configuring cooking position settings
The required heat setting is selected in the settings
area.
Each heat setting has an intermediate setting ending in
.5.
Notes
– To protect the fragile parts of your appliance from
overheating and electrical overloading, the hob may
temporarily reduce the power.
– In order to prevent the appliance from producing
excess noise, the hob may temporarily reduce the
power.
Selecting a hotplate and heat setting
The hob must be switched on.
1 Place the cookware on the cooking surface.
2 Touch the
#
symbol for the cooking position on the
touchscreen display. The settings area will light up
on the cooking position display.
3 Within the next 4 seconds, scroll up with your finger
and select the heat setting you require.
To select heat setting 9.0, tap 9.0 directly.
The heat setting is set.
Heat setting 1.0 = lowest setting
Heat setting 9.0 = highest setting
K
PLQ