Automatic programmes
en
17
11 Automatic programmes
You can prepare a wide range of food using the auto-
matic programmes. The appliance selects the optimal
setting for you.
11.1 Information about the settings for the
automatic programmes
Observe the instructions for the settings of the auto-
matic programmes.
¡
The cooking result depends on the quality of the
food and the size and type of cookware. For an op-
timal cooking result, only use food that is in good
condition and meat that is chilled to refrigerator tem-
perature. For frozen food, only use food straight out
of the freezer.
¡
The food is divided into categories. One or more
dishes are listed for each category. The first position
on the display shows the last selected category.
¡
The automatic programme suggests a temperature,
type of heating and cooking time.
¡
For some food, the appliance prompts you to enter
the weight. It is not possible to set weights outside
the preprogrammed weight range.
¡
For some dishes, you are asked to enter the desired
level of browning, the thickness of the food and the
cooking level of the meat or vegetables.
¡
For some food, preheat the empty cooking compart-
ment. Only place the food in the cooking compart-
ment once the preheating is complete and a mes-
sage is shown on the display.
¡
Your preferred settings are shown next time as a
suggestion.
¡
For some recipes, you need the core temperature
probe. Use the core temperature probe for these re-
cipes. →
¡
To achieve good results, the cooking compartment
must not be too hot for the type of food you have
selected. If the cooking compartment is too hot, the
display shows a corresponding notification. Allow
the appliance to cool and then try again.
11.2 Setting the food
Note:
The appliance guides you through the entire set-
ting process. Follow the instructions in the display.
1.
Turn the function selector to .
2.
Press .
3.
Press to confirm.
4.
Use the rotary selector to select the required cat-
egory.
5.
Use the rotary selector to select the food that you
require.
6.
For many dishes, you can change the settings to
suit your needs.
For some dishes, you must set the weight.
a
The display shows the possible settings.
7.
Press .
a
The display shows information about the accessor-
ies and preparation.
8.
Press to confirm the required settings.
9.
Follow the information on the display.
a
Once the cooking time has elapsed, a signal tone
sounds.
a
The appliance stops heating.
a
The appliance carries out steam removal.
Note:
If you open the appliance door during an auto-
matic programme, this affects the cooking result. Open
the appliance door only briefly. The appliance interrupts
the automatic programme and continues to run when
you close the appliance door.
Adding extra cooking time
After the cooking time has ended, you can leave some
dishes to continue cooking if you are not satisfied with
the cooking result.
Requirement:
A query appears on the display asking if
you want to continue cooking.
1.
Press to confirm.
2.
Select a single or double cooking time as required.
3.
Press to start.
4.
If the "Continue cooking" function has ended, turn
the function selector to .
Note:
If you press during the extended cooking, the
appliance carries out the steam removal and the exten-
ded cooking end.
Changing and cancelling the programme
Note:
Once you have started the programme, you can
no longer change the settings.
▶
Turn the function selector to .
a
The appliance ends the programme.
11.3 Calling up the last automatic
programmes used
The appliance saves the last 5 dishes with the settings
that you selected. You have the option to save these
dishes with the selected settings as individual recipes.
Note:
If you save the settings for the individual recipe
using the "Last automatic programmes" function, you
can no longer retroactively change the settings for indi-
vidual recipes.
→
1.
Turn the function selector to .
a
The display shows .
2.
Press .
3.
Use the rotary selector to select "Last automatic pro-
grammes".
4.
Press to confirm.
5.
Use the rotary selector to select the food that you
require.
6.
