Installation instructions
en
57
7.
Do not shorten the outlet hose.
22.10 Installing the appliance in a tall unit
1.
Remove the red plastic transport lock from the up-
per door catch.
‒
Undo the screws from behind.
‒
Remove the transit bolts.
2.
Remove the transport brackets for the inlet and out-
let hose.
3.
When installing 2 appliances next to each other,
align both door handles to the centre.
4.
When installing 2 appliances on top of each other,
observe the clearances.
5.
Observe the clearances when installing in a tall unit.
6.
If there is no intermediate floor above the appliance,
secure the appliance against tipping in the unit. Se-
cure 2 commercially available brackets on both
sides in the unit at a depth of 450 mm, 5 mm above
the height of the appliance.
7.
Run the connection cable, the inlet hose and the
outlet hose to the connections in the rear left of the
built-in unit.
