16
Operating the appliance
Oven interior
The cooking compartment has five shelf levels.
9
CAUTION
Do not place anything on the cooking
compartment floor. Do not cover it with
aluminium foil. A build-up of heat could damage
the appliance or cause injury.
9
CAUTION
Do not slide any accessories between the shelf
positions, or they may tip.
Inserting accessories
The accessories feature a latching function. The
latching function prevents tilting of accessories when
pulling them out. You must insert accessories in the
oven interior correctly so that tilt protection will work.
When inserting the rack, make sure
▯
that the engaging lug (a) points downward
▯
that the rack's safety clip is at the rear and top.
Turning on
1
Set the required heating mode using the function
selector. The chosen heating mode and the
default temperature are displayed.
2
If you want to change the default temperature:
set the required temperature with the rotary
selector.
The preheating symbol
’
appears on the display.
The bar continuously shows the preheating status.
When the set temperature is reached, a signal sounds
and the preheating symbol
’
goes off.
Note:
The oven interior lighting stays switched off at a
temperature setting below 160° F (70°C).
Switching off:
Turn the function selector to
0
.
Quick heat
With the "quick heat" function, your appliance reaches
the desired temperature especially fast when using
the top heat, bottom heat, and top + bottom heat types
of heating.
To ensure an even cooking result, do not place your
dish in the cooking compartment until "quick heat" has
ended.
Safety lock
For your protection, the appliance has a safety shut-off
feature. Every heating operation is switched off after
12 hours if the appliance is not operated during this
time. A message appears in the display.
Exception:
programming with the long-term timer.
Turn the program selection to
0
, after which you can
operate the appliance in the manner to which you are
accustomed.
D
D
