Gaggenau BMP 251, Instruction Manual

Page: 15 / 44

14
Combination mode
In combination mode, an oven heating function or the
full surface grill are operated at the same time as the
microwave. This enables your meals to be cooked more
quickly while still being nicely browned.
You can use all of the microwave output settings.
Exception: 1000 watts.
You can also combine the selected heating function
with the microwave's sequential operation.
Setting the combination mode
1 Use the function selector to set the required oven
heating type or microwave power.
Note: You can start the combination mode with an
oven heating type or microwave power. In the
following example, an oven heating type is used to
begin.
2 Use the rotary selector to set the oven temperature
or grill setting.
Depending on the operating mode that is selected,
the right-hand control panel displays the
9 symbol
for microwave or the ; symbol for oven. You can
use this to add the relevant other operating mode.
3 Use the 9 symbol to add a microwave power level.
4 Use the function selector to set the required
microwave power.
5 Use the rotary selector to set the cooking time.
6 Touch
I
to start.
The operation begins. You can see the cooking time
counting down.
An audible signal sounds once the cooking time has
elapsed. The signal stops prematurely if you touch the
™ symbol, open the appliance door or set the function
selector to 0. The combination mode has finished.
Changing settings
You can change the oven heating type and oven
temperature, the grill setting, or the microwave power
and cooking time. You can also make changes during
operation by touching the
H
symbol. The operation
stops.
1
Select the operating mode with the symbols = or >
.
2 Use the function selector to change the oven
heating type or the microwave power.
3 Use the rotary selector to change the oven
temperature, grill setting or the cooking time for the
microwave power.
4 Touch
I
to start.
Deleting settings
You can delete the settings, even during operation, by
touching the
H
symbol. The operation stops.
1 Select the operating mode with the symbols = or >
.
2 Use the : or < symbols to delete the heating type.
3 Touch
I
to start.
Pause:
You can touch
H
to suspend the operation. Touch
I
to
continue the operation.
Switching off:
To cancel the operation and delete the settings, turn the
function selector to 0.
15
Sequential operation
With sequential operation, you can set up to five
different types of heating and cooking times to run one
after the other.
Setting sequential operations
1 Use the function selector to set the required
microwave power or oven heating type.
2 Touch the h symbol.
The sequential operation menu appears.
3 Use the rotary selector to set the cooking time,
temperature or grill setting.
4 Use
C
to select the second phase.
5 Use the function selector to set the required
microwave power or oven heating type. Use the
rotary selector to set the cooking time, temperature
or grill setting.
Note: Between two microwave power levels, you
can define a compensation time so that you can
distribute the temperature evenly through the food.
To do this, touch the
6
symbol and use the rotary
selector to set a cooking time.
6 Use
C
to select the third phase.
7 Use the function selector to set the required
microwave power or oven heating type. Use the
rotary selector to set the cooking time, temperature
or grill setting.
8 Use
C
to select the "Cooking time"
6
function.
9 Use the rotary selector to set the required cooking
time.
10 Touch ™ to confirm.
The main sequential operation menu is displayed.
The settings for the phases appear in the display.
11 Touch
I
to start.
The operation begins. You can see the cooking time
counting down.
The appliance switches off once the cooking time has
elapsed. An audible signal sounds. The signal stops
prematurely if you touch the
™ symbol, open the
appliance door or set the function selector to 0. The
sequential operation has finished.
Changing the settings for the current phase:
Touch the
H
symbol. The operation stops. Touch the h
symbol and change the settings. Touch the
™
symbol to
exit the menu. Touch
I
to start.
Deleting settings:
Touch the
' symbol.
Pause:
You can touch
H
to suspend the operation. Touch
I
to
continue the operation.
+RWDLU