Gaggenau BMP 251, Instruction Manual

Page: 17 / 44

16
Switching off:
To cancel the operation and delete the settings, turn the
function selector to 0.
Notes
‒ The sequential operation can be extended using the
combination mode.
‒ You can only select the 1000 W microwave power
setting once.
‒ The oven heating types cannot be combined with
the 1000 W microwave power setting.
‒ The sequence of each setting is entirely up to you.
You can start with the cooking time, microwave
power or oven heating type.
‒ If you open the appliance door during cooking, the
fan may continue to run.
End of cooking time
In oven mode, you can delay the cooking time end to a
later time. This function is not available when using the
microwave.
For example: It is 14:00. The meal requires a cooking
time of 40 minutes. You want it to be ready by 15:30.
You enter the cooking time and delay the cooking time
end to 15:30. The electronics calculates the starting
time. The appliance automatically starts at 14:50 and
switches off at 15:30.
Note that food which is easily spoiled must not remain in
the oven for too long.
Delaying the cooking time end
You have set the heating type, temperature and cooking
time.
1
Touch
C
to select the "Cooking time end"
5
function.
2 Use the rotary selector to set the required cooking
time end.
3 Touch ™ to confirm.
A note appears in the display, stating that a cooking
time end has been set. Touch
™ to confirm.
4 Touch
I
to start.
The appliance goes into standby mode. The display
shows the operating mode, the temperature, the
cooking time and the remaining time until the start. The
appliance starts at the calculated time and automatically
switches off once the cooking time has elapsed.
The appliance switches off once the cooking time has
elapsed. An audible signal sounds. The signal stops
prematurely if you touch the
™ symbol, open the
appliance door or set the function selector to 0. The
sequential operation has finished.
Changing the cooking time:
Touch the
H
symbol. Touch
C
to select the "Cooking
time"
6
function. Use the rotary selector to set the
required cooking time. Touch ™ to confirm. Touch
I
to
start.
Changing the cooking end time:
Touch the
H
symbol. Touch
C
to select the "Cooking
time end"
5
function. Use the rotary selector to set the
required cooking time end. Touch ™ to confirm. Touch
I
to start.
Deleting settings:
Touch the
' symbol.
Cancelling the entire process:
Set the function selector to 0.
K
PLQ
&RRNLQJWLPHHQG
K
PLQ
17
Automatic programmes
The automatic programmes enable you to prepare food
very easily. You select the programme and enter the
weight of your food. The automatic programme makes
the optimum setting. You can select from 15
programmes.
Setting a programme
1 Use the function selector to set any operating
mode.
Note: The function selector must not be set to
ž or
S.
2 Touch the "chef's hat" i symbol and the automatic
programmes are displayed.
3 Touch ™ to confirm.
The first programme appears in the display.
4 Use the rotary selector to select the required
programme, e.g. Cook: "Fresh vegetables".
5 Use % to select the weight n function.
6 Use the rotary selector to set the weight.
7 Touch ™ to confirm.
8 Touch
I
to start.
The operation begins. You can see the cooking time
counting down.
An audible signal sounds once the cooking time has
elapsed. The signal stops prematurely if you touch the
™
symbol, open the appliance door or set the function
selector to 0. The programme has ended.
Standing time:
Some dishes must be left to stand after the programme
ends, in order to reach an even temperature or for
subsequent cooking. Wait until the standing time has
elapsed before removing the food from the oven.
Tips:
Touch
* to receive tips on cookware, accessories and
shelf position. Touch ™ to exit this display.
Notes:
Touch
( to view notes for the preparation. The ) symbol
is displayed for important information and action
prompts. Touch
™ to exit this display.
For some dishes, during the preparation stage, the
display shows information about turning or stirring.
Follow this information. When you open the appliance
door, the operation stops. After the door is closed,
continue the operation by touching
I
. If you do not turn
or stir the food, the programme will continue on until its
end, as normal, anyway.
Pause:
You can touch
H
to suspend the operation. Touch
I
to
continue the operation.
Switching off:
To cancel the operation and delete the settings, turn the
function selector to 0.
Individual adjustment
If the cooking result of a programme does not meet
your expectations, you can make individual adjustments
before the programme starts. Enter the settings as
described in steps 1 to 4.
1 Use % to select the individual settings.
2 Use
C
to select the o "Cooking result" function.
3 Set the cooking result using the rotary selector.
Anti-clockwise = cooking result less well done.
Clockwise = cooking result more well done.
4 Confirm with ™ .
The display switches to the programme. The
cooking time is changed accordingly.
$XWRPDWLFSURJUDPPHV
)UHVKYHJHWDEOHV
K NJ
PLQ
VHF
$
&RRNLQJUHVXOW