Gaggenau BM454 IN Series, User Manual

Page: 18 / 44

en
Timer functions
18
‒
To cancel without saving, press ⁠.
14.3 Entering a name
1. Enter a name for the recipe under "ABC".
2.
Use the rotary selector to select the letters.
A new word always begins with a capital letter.
Latin characters, certain special characters and
numbers are available.
3.
Briefly press to position the cursor to the right.
4. Press and hold to switch to umlauts and spe-
cial characters.
5. Press twice to insert a break.
6.
Briefly press to position the cursor to the right.
7. Press and hold to switch to normal characters.
8.
Press twice to insert a break.
9. Press to delete a letter.
10.
Select one of the following options:
‒
Press to save.
‒
To cancel without saving, press ⁠.
14.4 Starting a recipe
1.
Use the function selector to select any type of heat-
ing.
a The display shows ⁠.
2.
Press and use the rotary selector to select "Indi-
vidual recipes".
3.
Press to confirm.
4. Use the rotary selector to select the desired recipe.
5.
Press to start.
a The operation starts and you can see the cooking
time counting down.
a The display shows the settings for the phases on
the display bar.
Note:
You can use the rotary selector to change the
temperature and the grill setting for the oven type of
heating, and to change the duration for the microwave
output setting while the recipe is cooking. This does
not change the saved recipe.
14.5 Changing a recipe
You can change the settings of a recorded or pro-
grammed recipe.
1. Use the function selector to select any type of heat-
ing.
a The display shows ⁠.
2.
Press and use the rotary selector to select "Indi-
vidual recipes".
3.
Press to confirm.
4. Use the rotary selector to select the desired recipe.
5.
Press ⁠.
6. Use to select the required phase.
a
The display shows the settings. You can use the
rotary selector or function selector to change the
settings.
7. Select one of the following options:
‒
Press to save.
‒
To cancel without saving, press ⁠.
14.6 Deleting a recipe
1.
Use the function selector to select any type of heat-
ing.
a
The display shows ⁠.
2.
Press and use the rotary selector to select "Indi-
vidual recipes".
3.
Press to confirm.
4.
Use the rotary selector to select the desired recipe.
5.
Use to delete the recipe.
6.
Press to confirm.
15 Timer functions
Your appliance has different timer functions, with which
you can control its operation.
15.1 Calling up the timer menu
Requirements
¡
The appliance is activated.
¡
The function selector is set to or ⁠.
▶
Press ⁠.
a
The timer menu is displayed.
Notes
¡
If you turn the function selector to a type of heating
or basic settings while the short-term timer or stop
watch is running, a notification appears on the dis-
play.
Press to confirm the notification and interrupt the
short-term timer or the stop watch. The appliance is
ready to use.
¡
In order to continue the short-term timer or stop
watch, turn the function selector to or ⁠.
¡
You can use the short-term timer and the stopwatch
at the same time.
¡
If the function selector is set to , the display only
shows the short-term timer.
¡
If the function selector is set to , the display shows
the short-term timer and the stopwatch.
15.2 Short-term timer
The short-term timer only runs if you have not set any
other function. You can enter a maximum of
90 minutes.
Set the short-term timer
1.
Call up the timer menu.
a
The display shows "Timer" ⁠.
2.
Use the rotary selector to set the required cooking
time.
3.
Press to start.
a
The appliance closes the timer menu and the time
counts down.
a
The display shows and the time that has elapsed.
a
A signal tone sounds once the time has elapsed. If
you press , you can end the signal early.
Tip:
Press to exit the timer menu. The settings are
lost.