17
Pause:
The operation can be paused using the
H
symbol. Use
the
I
symbol to continue.
Switching off:
To stop the operation and cancel the settings, turn the
function selector to
0
.
Notes
‒
The sequential operation can be supplemented
with the combination mode.
‒
The 1000-watt microwave output setting can only
be selected once.
‒
The oven heating functions cannot be combined
with the 1000-watt microwave output setting.
‒
The order of each setting is entirely up to you.
You can start with the cooking time, microwave
output or oven heating function.
‒
If you open the appliance door during cooking,
the fan may continue to run.
End of cooking time
In oven mode, you can delay the cooking-time end to a
later time. This function is not available in conjunction
with the microwave oven.
For example: It is 14:00. The dish requires a cooking
time of 40 minutes. You want it to be ready at 15:30.
Enter the cooking time and delay the cooking-time end
until 15:30. The electronics system calculates the start
time. The appliance starts automatically at 14:50 and
switches off at 15:30.
Bear in mind that food which spoils easily should not
be left in the oven for too long.
Delaying the cooking-time end
You have set the heating function, temperature and
cooking time.
1
Use
C
to select the
5
"Cooking-time end"
function.
2
Set the required cooking-time end using the
rotary selector.
3
Press
™
to confirm.
A message is shown in the display to warn that a
cooking-time end has been set. Press
™
to
confirm.
4
Press
I
to start.
The appliance goes into standby mode. The display
shows the operating mode, the temperature, the
cooking time and the remaining time until the start.
The appliance starts at the calculated time and
automatically switches off once the cooking time has
elapsed.
Once the cooking time has elapsed, the appliance
switches off. An audible signal sounds. The signal
stops early if you touch the
™
symbol, open the
appliance door, or set the function selector to
0
. The
sequential operation has finished.
Changing the cooking time:
Touch the
H
symbol. Use
C
to select the
6
"Cooking
time" function. Set the required cooking time using
the rotary selector. Press
™
to confirm. Press
I
to
start.
Changing the cooking-time end:
Touch the
H
symbol. Use
C
to select the
5
"Cooking-
time end" function. Set the required cooking-time end
using the rotary selector. Press
™
to confirm. Press
I
to start.
Deleting the settings:
Touch the
'
symbol.
To cancel the entire procedure:
Set the function selector to
0
.
&RRNLQJWLPHHQG
K
PLQ
