14
You can change the temperature at any time using the
rotary selector.
You can change the heating function at any time using
the function selector. Press
I
to restart.
Pause:
The operation can be paused using the
H
symbol. Use
the
I
symbol to continue.
Switching off:
To stop the operation and cancel the settings, turn the
function selector to
0
.
Calling up the current temperature:
Touch the
(
symbol to display the current oven
temperature for several seconds (from 100 °C). Use
the
™
symbol to return to the standard display.
Note:
During continuous operation after heating up,
slight deviations in temperature are normal,
depending on the heating function.
Rapid heating
The "Rapid heating" function brings your appliance to
the desired temperature quickly.
To ensure an even cooking result, only put your food in
the cooking compartment when the "rapid heating"
phase is complete.
You must activate the "Rapid heating" function in the
basic settings (refer to the
Basic settings
section).
Safety shut-off
For your protection, the appliance is equipped with an
automatic safety shut-off. Any heating process is
switched off after 12 hours if the oven is not operated
in this time. A message appears in the display.
Exception:
The long-term timer has been programmed.
Set the function selector to
0
, then the appliance can
be operated again as usual.
Full surface grill
In grill mode, you can select one of three grill
settings:
Setting the full surface grill
1
Use the function selector to set the full surface
grill.
The
Q
full surface grill symbol and grill setting 3
appear in the display.
2
Use the rotary selector to set the grill setting.
Note:
If required, you can now set the cooking
time for your dish and delay the cooking-time end
to a later time. Touch the
h
symbol; the
sequential operation menu is displayed. Use
C
to
select and set the
6
"Cooking time" function.
Use
C
to select and set the
5
"Cooking-time
end" function.
You can find more detailed information on this in
the
Sequential operation
section.
3
Press
I
to start.
You can change the grill setting at any time using the
rotary selector.
You can change the operation mode at any time using
the function selector. Press
I
to restart.
Pause:
The operation can be paused using the
H
symbol. Use
the
I
symbol to continue.
Switching off:
To stop the operation and cancel the settings, turn the
function selector to
0
.
Heating function
Grill setting
Use
Q
Full surface
grill
1 (low)
For soufflés and deep
bakes
2 (medium)
For flat bakes and fish
3 (high)
For steaks, sausages
and toast
