background image

en 

Avoiding material damage

4

Changes to the electrical or mechanical as-
sembly are dangerous and may lead to mal-
functions.

Do not make any changes to the electrical
or mechanical assembly.

The filter cover may swing out.

Open the filter cover slowly.

Take hold of the filter cover after opening
until it no longer swings out.

Close the filter cover slowly.

Risk of injury when opening and closing the
hinges.

Keep your hands away from the hinges.

The light emitted by LED lights is very
dazzling, and can damage the eyes (risk
group 1).

Do not look directly into the switched-on
LED lights for longer than 100 seconds.

If the appliance is operated by another person
via the Home Connect app during cleaning,
this increases the risk of injury.

Before cleaning, disconnect the appliance
from the Home Connect app.

WARNING ‒ Danger: Magnetism!

The appliance contains permanent magnets.
They may affect electronic implants, e.g.
pacemakers or insulin pumps.

Persons with electronic implants must
stand at least 10 cm away from the appli-
ance.

WARNING ‒ Risk of electric shock!

If the appliance or the power cord is dam-
aged, this is dangerous.

Never operate a damaged appliance.

Never pull on the power cord to unplug the
appliance. Always unplug the appliance at
the mains.

If the appliance or the power cord is dam-
aged, immediately unplug the power cord
or switch off the fuse in the fuse box.

Call customer services. → 

Page 12

Incorrect repairs are dangerous.

Repairs to the appliance should only be
carried out by trained specialist staff.

Only use genuine spare parts when repair-
ing the appliance.

If the power cord of this appliance is dam-
aged, it must be replaced by trained spe-
cialist staff.

An ingress of moisture can cause an electric
shock.

Before cleaning, pull out the mains plug or
switch off the fuse in the fuse box.

Do not use steam- or high-pressure clean-
ers to clean the appliance.

WARNING ‒ Risk of explosion!

Highly caustic alkaline or highly acidic clean-
ing agents in conjunction with aluminium parts
in the interior of the appliance may cause ex-
plosions.

Never use highly caustic alkaline or highly
acidic cleaning agents. In particular, do not
use commercial or industrial cleaning
agents in conjunction with aluminium parts,
e.g. grease filter on extractor hoods.

WARNING ‒ Risk of fire!

Fatty deposits in the grease filters may catch
fire.

Clean the grease filters regularly.

WARNING ‒ Risk of injury!

Improper repairs are dangerous.

Repairs to the appliance should only be
carried out by trained specialist staff.

If the appliance is defective, call Customer
Service.
→ 

"Customer Service", Page 12

WARNING ‒ Risk of electric shock!

Penetrating moisture may cause an electric
shock.

Do not use wet sponge cloths.

2  Avoiding material damage

ATTENTION!

Condensate may cause corrosion damage.

To prevent condensation from building up, switch on
the appliance during cooking.

If moisture gets into the controls, this may result in
damage.

Never clean controls with a wet cloth.

Incorrect cleaning damages the surfaces.

Follow the cleaning instructions.

Do not use harsh or abrasive detergents.

Clean stainless steel surfaces in the direction of the
finish only.

Never clean controls with stainless steel cleaners.

Condensation that flows back in may damage the ap-
pliance.

The air extraction duct must be installed with a
gradient of at least 1° from the appliance.

Summary of Contents for AW 27





















Reviews: