background image

en 

Disposal

12

Fault

Cause and troubleshooting

The LED lighting
does not work.

Different causes are possible.

Defective LED lights may be replaced by the manufacturer, their customer service or a
qualified technician (electrician) only.

Call the after-sales service. 
→ 

"Customer Service", Page 12

The button illumina-
tion does not work.

The control unit is faulty.

Call the after-sales service. 
→ 

"Customer Service", Page 12

Home Connect is not
working properly.

Different causes are possible.

Go to www.home-connect.com.

The hob-based hood
control is not working
properly.

It may be necessary to change the settings.

Read the instruction manual for the hob.

Go to www.home-connect.com.

12  Disposal

12.1 Disposing of old appliance

Valuable raw materials can be reused by recycling.

1.

Unplug the appliance from the mains.

2.

Cut through the power cord.

3.

Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.

This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.

13  Customer Service

Function-relevant genuine spare parts according to the
corresponding Ecodesign Order can be obtained from
Customer Service for a period of at least 10 years from
the date on which your appliance was placed on the
market within the European Economic Area.

Note: 

Under the terms of the manufacturer's warranty

the use of Customer Service is free of charge.

Detailed information on the warranty period and terms
of warranty in your country is available from our after-
sales service, your retailer or on our website.
If you contact Customer Service, you will require the
product number (E-Nr.) and the production number
(FD) of your appliance.

The contact details for Customer Service can be found
in the enclosed Customer Service directory or on our
website.

13.1 Product number (E-Nr.) and production
number (FD)

You can find the product number (E-Nr.) and the pro-
duction number (FD) on the appliance's rating plate.
Depending on the model, the rating plate can be found:

¡

Inside the appliance (remove grease filters for ac-
cess).

¡

On top of the appliance.

Make a note of your appliance's details and the Cus-
tomer Service telephone number to find them again
quickly.

14  Accessories

You can buy accessories from the after-sales service,
from specialist retailers or online. Only use original ac-
cessories, as these have been specifically designed for
your appliance.
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance. → 

Page 12

You can find out which accessories are available for
your appliance in our catalogue, in the online shop or
from our after-sales service.
www.gaggenau.com

Accessories

Order number

2 x Long Life odour filters
for AW25.

AA250112

Summary of Contents for AW 27





















Reviews: