![background image](http://html1.mh-extra.com/html/gage-bilt/gb754sh-cb/gb754sh-cb_original-instructions-manual_4322567004.webp)
4
REV 7/22
GB754SH
-
CB S/N: 1001 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
2.25 lbs. (1.02 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar)
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.460" (11.68mm)
Rated pull load
-
8,200 lbs. (36.47 kN)
Noise level
-
Less than 80 dB(A)
Vibration
-
Tested–
No Hazards Found
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB754SH
-
CB can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
The GB754SH
-
CB is a pneumatic
-
hydraulic split handled installation tool designed specifically for the efficient installation of blind rivets,
lockbolts and MAGNA
-
GRIP® fasteners. This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The
head assembly when held in hand weighs 2 1/4 lbs. (1.02 kg). The entire split handle installation tool weighs 10 1/2 lbs. (4.76 kg). It has
a
.460” (11.68
mm) fastener setting stroke.
The GB754SH
-
CB split handled installation tool operates on 90 to 100 psi (6.2
-
6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing
the maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB754SH
-
CB does not exceed 80 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The air inlet is provided with 1/4
-
18 female pipe thread for accepting the user's air hose fitting.
The GB754SH
-
CB comes with 8 feet (2.4 m) of hose. Pull pressure varies with different length hoses. When ordering specify the shortest
length hose possible for your application this will provide optimum pull pressure. For example if your application only requires 5 feet (1.5 m)
of hose, order a split handled installation tool with
-
5 suffix (GB754SH
-
5
-
CB). Please consult our engineering department for specific applications.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THIS TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection
chart on pg. 20).