8/14
10
HEAD
WARNING:
Dispose of Hydraulic Oil in accordance with applicable regulations.
Remove nose assembly and adapter from tool before attempting disassembly of head cylinder assembly (703134).
Remove end cap (703114). Push against threaded end of piston (703607) to slide it out of head cylinder ass’y (703134). Be careful not
to damage threads or cause burrs on polished piston surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the
socket head cap screws (400061 and 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket.
403764 - O'RING
401080 - BACK-UP RING
204304 - SWIVEL ASSEMBLY
NOT
SHO
WN: 7
034
40 GR
IP (2
X)
10204
NOSE TIP
10757 - ANVIL HOLDER
20518 - COLLET
30617 - JAW ASSY
703460 - FOLLOWER ASSY
405371 - SPRING
70820 - JAM NUT
703009
SLEEVE EXTENSION
70856 - JAM NUT
703015
DRAWBOLT EXTENSION
703011 - TUBE
S572 - STAT-O-SEAL
402482 - BUTTON HEAD
CAP SCREW
S834 - O'RING
401089 - BACK-UP RING
S834 - O'RING
703607 - PISTON
405865 - POLYSEAL
S829 - O'RING
400788 - O'RING
703114 - END CAP
703134 - HEAD CYLINDER ASSY.
703533 - UNION
400788 - O'RING
401816 - PLUG
O'R
ING
IN PO
LYSEAL
MUST
FACE IN
THI
S D
IRECTION
703044
SLEEVE EXTENSION
70856 - JAM NUT
703045
DRAWBOLT EXTENSION
703046 - TUBE
A-663 - HANGER
703563 - HOSE GUARD (NOT SHOWN)
402482 - B.H.C.S.
S572 - STAT-O-SEAL
S572 - STAT-O-SEAL (2)
402482
BUTTON HEAD
CAP SCREW (2)
744303 - MANIFOLD-HANDLE
S1181 - BARBED FITTING (2)
A-144 - HOSE CLAMP (2)
704305 - AIR LINE
204304 - SWIVEL ASSY
(INCLUDES 401080 & 403764)
400061
SOCKET HEAD
CAP SCREW (2)
400066
SOCKET HEAD
CAP SCREW (2)
724017 LEVER
ASSY
A-336
HYDRAULIC HOSE
744306
MANIFOLD-HEAD
ASSY
704129 - GASKET
S832 - O'RING
704130
AIR ACTUATOR
ASSY
