11/14
10
HEAD
WARNING:
Dispose of Hydraulic Oil in accordance with applicable regulations.
Remove nose assembly and adapter from tool before attempting disassembly of head cylinder assy.
Remove end cap (703114). Push against threaded end of piston (703607) to slide it out of head cylinder assy (703134). Be careful not
to damage threads or cause burrs on polished piston (703607) surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the
socket head cap screws (400061 and 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
403764 - O'RING
401080 - BACK-UP RING
204304 - SWIVEL ASSEMBLY
NOT
SHO
WN: 7
034
40 GR
IP (2
X)
