4
12/09 REV. 4/23
GB703SH S/N: 1403 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
4.5 lbs. (2.0 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar)
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.780" (19.8 mm)
Rated pull load
-
2,200 lbs. (9.8 kN)
Noise level
-
81.5 dB(A)
Vibration
-
Tested
-
No Hazards Found
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB703SH can be operated between 0ºF
-
118º (
-
17.8ºC / 47.8ºC)
The GB703SH is a pneumatic
-
hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets.
This tools unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head cylinder assembly when held
in hand weighs 4.5 lbs. (2.0 kg). The entire split handle installation tool weighs 10 lbs. (4.5 kg). It has a
.780” (19.8
mm) fastener setting
stroke.
The GB703SH split handle installation tool operates on 90 to 100 psi. (6.2
-
6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing
maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB703SH does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The GB703SH comes with 8 feet (2.4 m) of hose. Hoses are attached on the bottom of the split handle. Vacuum systems are available
for this tool, please consult our engineering department for specific applications.
The air inlet is provided with 1/4
-
18 female pipe thread for accepting the user's air hose fitting.
UNLESS ORDERED FASTENER SPECIFIC (I.E. GB703SH/4N), THE STANDARD GB703SH IS FURNISHED WITH NOSE ASSEMBLY 6N
-
703
-
18
AND A SPARE NOSE TIP (10202) AND FOLLOWER (40307) TO CONVERT TO A 4N
-
703
-
18. ALL OTHER NOSE TIPS MUST BE ORDERED
SEPARATELY. WHEN ORDERING TOOL FASTENER SPECIFIC, PLEASE CONTACT GAGE BILT FOR MORE INFORMATION.
