GAELCO ATV TRACK, Operator'S Manual

Page: 47 / 92

GAELCO - ATV QUADS TRACK
47
Proceed as follows when accessing areas protected by the hood:
1) Enter the MOVEMENT SYSTEM screen in Test Mode, with the brake levers in their
highest position on the mobile platform (corresponding to figure 0.50 for both motors). For
further details, consult Section 6.3 of this manual. The relevant figure is shown on the right
in brackets.
2) Remove the four screws which hold the top of the hood to the mobile platform. The line
drawing only shows the screws on one side.
9.9 PARTIAL DISASSEMBLY OF THE PROTECTION HOOD
To check the potentiometer, check the Accelerator option from the INPUT /OUTPUT
screen and check the values are as follows:
1) Throttle (right forward)
Reading 00(006) The figure in brackets may vary between 001 and 006.
2) Full Throttle (maximum acceleration)
Reading 01(230) The figure in brackets may vary between 220 and 230.
If the readings are outside these values in the respective throttle positions, it indicates that
the potentiometer pinion is wrongly positioned with respect to the throttle.