GAELCO ATV TRACK, Operator'S Manual

Page: 11 / 92

GAELCO - ATV QUADS TRACK
11
The machine can easily moved by using their castors. When moving the game machine,
always retract the levellers to the extreme up position, so the castors can make contact
with the floor. Please ensure that the levellers are raised fully when moving the machine,
even for short distances. Furthermore:
•
Do not use the handlebar or the rear handle to move the platform (rider assembly),
unless the levellers are raised fully.
•
When moving the machine on slopping or uneven surfaces or across steps, proceed
with extreme caution to avoid the risk of being crushed!
•
If there are steps or step-like differences in grade, move the machine by separating into
each unit. Be sure to catch the bottom part.
•
During transportation, pay attention so that de castors do not thread power cords.
•
Ensure that there is enough room to get through doors or to avoid any collision with
elements hanging from the ceiling. Read section 4 to know the dimensions of the
machine.
The two units of the machine are not equipped with lifting rings. It is therefore
absolutely prohibited to lift them with ropes or belts!
3.2.1 SECURING IN PLACE
Ensure that all the leg levellers make firm contact with the surface of the floor. This
precaution is crucial for the ATV-TRACK version with motion system, because the machine
can move of itself, causing an accident.
After making the adjustment of all legs, secure the height of each one by fastening upward
the nut.
3.3 PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE