GAELCO ATV TRACK, Operator'S Manual, Page: 48 / 92

GAELCO - ATV QUADS TRACK
48
If the movement system is not working properly, the position potentiometer (ATV-305)
should be checked and changed if necessary. The following points need to be borne in
mind in this connection:
1) When the shaft lever is completely upright (as shown in the illustration), the woodruff key
will also be in the upright position. Read the brake position on the MOVEMENT SYSTEM
screen while in Test Mode. When the position is reached, check that the line marked on
the silicon tube lines up with the motor woodruff key. The mark on the silicon tube lines up
with the woodruff key on the motor shaft. The mark lines up with the centre of the flat part
of the potentiometer shaft.
9.10 CHECKING POSITION POTENTIOMETERS
3) Push the hood upward (i.e. towards the upper part of the column). This frees a metal
catch located beneath the mobile platform, allowing the hood to be folded down flat.