GAC Trumpchi GS4 Manual Download Page 14

Page: 14 / 287

1. Safety Instructions

Seat Belt System Components

Seat belt system in your car consists of three-

point seat belts and seat belt indicator lamp on

the instrument (all five seats).

Seat belt indicator

OMA28-0002

Ignition switch or start switch is placed behind

"ON" position. When the driver or front passen-

gers don't wear seat belts, this indicator lamp

will light up, to remind the driver or front pas-

sengers wearing seat belts.

Warning

When the vehicle is running, always wear-

ing seat belts and wearing them properly

can greatly reduce the chance of serious

injury or death during emergency braking

or in a crash.

Note

Before starting driving, check the front

seat and make sure there is no heavy on

the seat to prevent the system from giving

a false alarm.

A28

V5_2016-04-11.indd 8

2016/7/11 16:04:26

Summary of Contents for Trumpchi GS4
































































































































































































































































































Search results

Summary of Contents for Trumpchi GS4

Reviews:

Brands by name

Popular brands

GAC Trumpchi GS4, Manual

Search results

Summary of Contents for Trumpchi GS4

Reviews:

Brands by name

Popular brands