127
2. Operating System and Equipment
Air distribution
Pressing this switch controls the interior air dis-
tribution status. You can select one of four air
outlet modes in the following order:
: Air flows from air vent on instrument
panel.
: Air flow is divided between the vents in
the instrument panel and the floor vents.
: Air flows from air vent around foot.
: Air flows is divided into two parts: air
vent around foot and air vent of front
windshield defroster.
All of the above states can be selected cycli-
cally in the order.
Note
To ensure optimal air distribution effects,
make sure each air outlet is open.
Windshield defrosting
Pressing the switch turns on/off the windshield
defroster and the front-side window defroster.
If the defrosting function is enabled through the
switch, the following will be performed auto-
matically:
•
Starting of compressor (A/C);
•
Air flows to the windshield;
•
Select Fresh Air for air circulation. In
the process of defrosting, operating this
switch again
During the course of defrosting, press this
switch again, and the defrosting is over, and it
restores to the state before defrosting;
Indicator light for windshield defroster switch
-
When the indicator light is lit, this indi-
cates that defrosting is in progress.
-
When the indicator light goes out, this
indicates that defrosting function is not
enabled.
Note
When the temperature control is set at
the coldest position, using the defrosting
function can cause windshield outside
fogging up and impact on driving sight,
resulting in accidents. When the defrost-
ing function is used, the temperature will
be set to HOT or WARM position.
A28
V5_2016-04-11.indd 127
2016/7/11 16:04:45
