4. Operating System and Equipment
Lane change flashlight
–
Switch the Start or Ignition switch to “ON”
position.
–
By pushing quickly (within 0.1~0.7s) the light
combination switch lever up or down to
position
②
, and then releasing it to let it return
to the original position, the corresponding turn
signal flashes three times, and the or in
the instrument cluster also flashes three times.
–
By pushing the light combination switch lever
up or down to position
②
and keeping it at this
position, the corresponding turn signal and
also the
or
in the instrument cluster
flash continuously. If the lever is released to let
it return to the original position, the flashing
stops.
Headlight High Beam
–
Switch the Start or Ignition switch to “ON”
position.
–
Turn the light switch to
position to start the
headlight low beam.
–
By pushing forward (forward direction of the
car) the light combination switch lever to
position
③
, the headlight high beams are
turned on and
in the instrument cluster
flashes.
–
By pulling back (backward direction of the car)
the light combination switch lever to position
④
, the headlight high beams are turned off,
in the instrument cluster is off, but
headlight low beams are still on.
–
By turning the light switch to OFF position, all
lights are turned off.
Warning
Headlight high beams may dazzle the
drivers of other cars nearby and result in
accidents. Please use them properly.
94
