Installation Instructions
4
8. Unscrew the inner panel and remove it.
WARNING Steel edges can cut.
CAUTION In the interior part of this inner panel there is a very delicate MICROTHERM insulation
panel. It has to be handled with extreme care. AVOID TOUCHING OR BENDING IT.
9. Do not disconnect the electrical heating elements. Remove the packing cardboard and the metallic plate. Lift and tilt
the elements outwards being careful not to damage the insulation on the bottom of the heater and carefully place the
storage bricks. Arrange two levels of bricks with the flat side facing to the back of the heater.
10. Place the second row of storage bricks with the flat side facing out.
11. Next replace the metallic plate in the top of the storage core, between the bricks and the Microtherm insulation
panel with the flat side facing up. It must be placed in the right position for the fan to work correctly
