4
6. - Connect the heater using the wiring diagram included at the end of this manual. Tighten properly the connection block
screws. Use only silicone insulated cables. Do not leave any remaining wire inside the heater.
WARNING
Touching live connections can cause serious personal injury.
7. - Unscrew the inner panel and remove it.
WARNING Steel edges can cut.
CAUTION In the interior part of this inner panel there is a very delicate thermal insulation MICROTHERM panel. It has
to be handled with extreme care. AVOID TOUCHING IT.
8. - Do not disconnect the electrical heating elements. Remove the packing cardboard and the metallic part. Lift and tilt the
elements outwards being careful not to damage the insulation on the bottom of the heater and place carefully the storage bricks.
Arrange two levels of bricks with the flat side facing the back of the heater.
