12) Press REC, it shows “OVER RECORD”
13) How to use the A-B repeat function
14) The recording is noise
15) The recorder auto shut down when I am recording
16) I Cannot Shut Off My Voice Recorder
Aftersale service: [email protected]
28
When press REC, it not records, it show “OVER RECORD”, that
means the voice recorder memory is full, or you have too many
“FOLDER” or “recordings” in the recorder.
Why this happened? Although you may not record too long time.
Sometimes mistakenly RECORD, and SAVE again and again, or copy
or create too many “FOLDER” in the recorder disk. Maybe there is
some files that cannot be read by the recorder, so you cannot find
directly from the recorder
So you need to format the voice recorder, or connect to computer and
have a check, after that format the recorder disk from your computer
directly.
During playback, press and hold M, you will see A on the screen, and
B is blink, it selected the start point Press and hold M again, select
point B
Now it will playback between Point A to B
Don’t recording near computer, electric fans, air conditioner, sound bar
that will easily cause noise, the recorder will pickup this statics noise.
Why this happened? The sleeper time function is ON, when set this,
no matter you are operating the device, or recording or playing, it will
force to shut down the device.
So you could go to System setting - > sleeper time, select OFF and
confirm it. You will close the sleep time function. In default, it was at
zero
So you could also try to restore to factory setting when this happened,
if not sure how to set the sleeper time.
When the recorder is charging, or connected to computer, even when
