When AVR mode is ON. Press REC, it means the device successfully
enter voice activated recording mode.
When AVR is on, device will record any voice. If no voice is detected, it will
not record to reduce blank time and save storage space.
At AVR mode, we still need to press STOP to save recordings when we
complete a recording task.
Aftersale service: [email protected]
21
1.4 Voice Activated Recording
What is Voice Activated Recording?
Voice Activated Mode (AVR)
From Level 1 to Level 7: Level 1 only picks up voice or sound above 70db,
a very loud sound. Level 7 is very sensitive, so any quiet sound will be
recorded. (i.e. normal environmental noise will activate recording).
Note: do not turn on this function for important lectures or meetings. It may
skip or lose some very important sentences at low decibels. Use regular
on/record/stop for meetings.
Voice Activated Sensitive Level
Level one, is the mostly dumb level, it means the mic will be less sensitive,
need louder voice to
active the recording, otherwise, the recording time is not counting, and it
was pause recording.
While level seven is the mostly sensitive level, it means the mic is very
sensitive, just a soft speaking will be captured. It will be almost
continuously recording, cannot see pause status.
It could select from level one to level seven
ON: turn on voice activated record function.
OFF: turn off voice activated record function.
AVR Mode
