8) Cannot find my recordings in the recorder
9) How to Turn ON Voice Activated Function
10) How to Use the AVR Mode (Voice Activated Function)
11) Press REC, it not recording
Aftersale service: [email protected]
27
All buttons will not work at this situation, if you press M and hold it, it
will exit connection mode, and will be failed to connect to your
computer.
This mainly caused by the device reading the MUSIC folder, you could
press and hold STOP switch back to RECORD folder.
Go to Menu Options, find record setting, enter it -> Voice Activated
Setting -> AVR mode -> ON, and press M confirm it.
Now pressing REC, the screen will show VOX, it means you have
successfully set voice activated recording function.
When AVR mode is ON, the recorder will enter voice activated
recording mode.
It will only picks up loud enough decibels voice (any sounds).
So we could select the best AVR level as we want, and get the best
effect of voice activated recording.
For L157 voice recorder, the AVR level could be selected from 1 -5;
The lower number means need higher decibels voice to activated the
recorder, and it need louder voice; At level 5, it is very sensitivity, only
a very low decibels or quiet speaking could be picked up.
Also, when voice activated function was ON, press REC, it will record
3 seconds, the device run 3 second to check the recorder was
corrected entered recording mode. And then it will only pick up loud
enough decibels voice / sound.
First check, the recording light blink or not.
Second, can you see VOX on the screen, If so, we suggest you could
close the AVR mode, if you do not want this function
Third, confirm if there is enough free space on the device.
Or connecting computer, and check whether there is recordings in the
device or not.
