manual
www.g-tools.nl
G-kit Bonanza installation instructions:
1. General:
Place the 4 angle profiles 1000mm (L).
Place the 2 back panels (D) and inter connect them with the
white H-profile (S1). Place both side panels (F) and both
doors (B1 + B2).
The door with the aluminium profile and weather strip
slides through the rail in the back so the strip seals the gap
where the doors overlap.
Place the roof panel (A2) on the 4 angle profiles 1000mm
and push it tight carefully.
Make sure the carbon filter is at the front side and timer on
the right.
