manual
www.g-tools.nl
Pull the electricity cord through the cable through entry.
Mount the cable through entry in the 21mm hole in the
back panel of the cabinet and mount the supplied plug.
Push the flange through the hole in the back panel in to
the silencer.
From outside to within.
Overview installation components:
Make sure the filter is at the front side and the timer box on the right side.
The cable from the timer box has to be pulled through the turn buckle before the suplied plug can be mounted.
The blue and brown wire should be connected to the plug’s poles. The green/yellow cable should be fixed to the
connector in the centre.
2. The air inlets
Each air inlet consists of 2 parts.
