manual
www.g-tools.nl
G-kit Bonanza 1m2:
Specifications:
Material:
aluminium extrusion profiles
patented plastic g-tools insert connectors
moist and fire resistant panels
Dimensions:
external (h x w x d): 176 x 118 x 78cm
internal (h x w x d) :161 x 115 x 75cm
Items below are only delivered when you’ve bought a complete version:
Timer box
2 contacts 600W with timer and relay
3 contacts 600W with continuous power
Ventilator
2 speed ventilator
position 1 - 220 m3 per hour
position 2 - 360 m3 per hour
diameter: 125mm
motor: EBM Pabst
balanced motor
Filter
maximum air flow: 480 m3/hour
optimal air flow: 360 m3/hour
height: 400mm
diameter filter: 190mm
diameter flange: 125mm
weight: 2,5kg
Warranty procedure:
G-tools offers a 2 years warranty on all components of the Bonanza except bulbs and filters. Please contact your
G-tools rep to explain the problem as there might be an easy fix without having to replace a part.
Maintenance and safety regulations:
The G-Kit Bonanza is a maintenance free object. Nevertheless there are a few factors to take into account.
- Only use grounded wall outlets to plug the Bonanza in.
- Do not plug the Bonanza into the wall outlet untill the machine is fully assembled and you have read the
instructions.
- Avoid contact of water with all electrical equipment
- When changing the light bulb always unplug the Bonanza from the wall outlet.
- Make sure the light bulb has had plenty of time to cool of before touching it.
- After screwing in the HPS bulb wipe finger prints of the bulb with a clean dry cloth to ensure its full life.
- Wait 20 minutes after the light has turned of before turning it on again.
- It’s recommanded that no more than 1 G-Kit Bonanza goes on a single 15A breaker. We also recommend the
Bonanza is plugged into a surge protector.This will protect the machine from any power spikes due to storms,
power outages, etc.
