Global-Tek (Singapore) Pte Ltd
Page
6
B/ In booster
heating element
1/
Remove wire V1 from heating element (diagram 3B),
2/
connect three points together, make it becomes like Diagram 3A,
3/
connect U1 & W1 to each side of the terminals.
Diagram 3A
Diagram 3B
C/ In booster heater contactor
Remove wires L2 & V2 from booster heater contactor
Signal terminals for connecting detergent dispenser
In the electrical control box,
1FU
provides 220v, 5A constant supplies for dispensing
equipment. Connect
2FU
& N terminals with the detergent signal power of the dispenser, connect
3FU
& N terminals with the rinse signal power of the dispenser (see diagram 4), each power
loading must not exceed 3A. During wash cycle, 2FU provides 220V output; during rinse cycle,
3FU provides 220V output. Please refer to the electrical wiring diagram on the machine case.
z
Attention: The pull out distance of the electrical box should be put into consideration for
all the wire connections, to prevent wires from loosening.
z
Attention: Please use 600V or above sealed electrical wire, never try telephone wire.
Diagram 4
