background image

Page 13

Important Installer Notes

 When installing the aerial antenna cable please ensure that the cable leaves the box by the

shortest possible route and is not coiled up and left inside the box

 Do not stick the aerial onto any metal surface. This will degrade the signal strength

received.

 Please remove all voicemail functions from the simcard before installing it into the Auto

Dialler. All major UK network voicemail removal codes are shown on page 5

 Before commissioning, please ensure the signal strength is sufficient by sending the text

message #STATUS#
We strongly recommend you need a score of at least 10. Also try the signal using both the
2G  3G & 4G via dipswitch 1 & 2

 If you do not receive a good signal, please reposition the aerial antenna to improve the

signal strength or alternatively change the network provider as signal strength can vary
between providers.

For more technical support please browse the FAQ’s on our website 

www.gsm-activate.co.uk

or alternatively email our technical support team at 

[email protected]

 and we will

reply or call back within 24 hours Monday - Friday.

17/02/2021 AD

Summary of Contents for GSM Auto Dialler Plus














Reviews: