BLUETOOTH WIRELESS BOOMBOX
FAQs
Q: Why can I not pair my Bluetooth device?
A: Occasionally the Bluetooth may need to be reset on your G-BOOM3, and/or your
Bluetooth streaming device(s).
First you will need to go into the Bluetooth settings menu on your audio streaming device
and delete / 'forget this device' from the list completely.
Next you will need to clear the Bluetooth memory on your G-BOOM3 which can be done
by pressing and holding the Bluetooth PAIR button for 3 seconds or until the blue LED
starts blinking, indicating that G-BOOM3 is searching for a compatible Bluetooth device.
Now with your Bluetooth streaming device and G-BOOM3 both powered on, try searching
for compatible devices under the Bluetooth settings menu of your audio streaming device.
After a few seconds it should detect G-BOOM3, at which time you can select “
G-BOOM3
”
and establish a new connection.
Q: Why do I not hear any music?
A: Make sure that a 3.5mm Line-In cable is not plugged into the Line-In jack of G-BOOM3
as this will automatically switch the unit to LINE-IN even if there is no external audio device
connected.
Q: How can play my G-BOOM3 as loud as possible?
A: When using Bluetooth or LINE-IN as the audio source, the volume of playback depends
on both the volume that G-BOOM3 is set to as well as the volume on your connected
device. To play at the loudest volume, please turn the volume up on both G-BOOM3 and
your connected device. Note that with LINE-IN playback, maximizing the volume may
cause distortion during playback.
Summary of Contents for G-Boom 3
Page 1: ...DO NOT PRINT THIS PAGE ...
